Star Micronics Radix User Manual page 318

304
Radix User's
MMU~
-
-_
PURPOSE:
CODE:
(decimal ASCII)
(hex ASCII)
REMARKS:
REFERENCE:
PURPOSE:
CODE:
(decimal ASCII)
(hex ASCII)
REMARKS:
REFERENCE:
Print double-density graphics.
(ESC)
"L" nl n2 ml m2 m3...
27 76 nl n2 ml m2 m3...
1B 4C nl n2 ml m2 m3...
This command selects 120 dots-per-inch, col-
umn-scan, bit-image graphics mode. The val-
ues of nl and n2 are the same as in normal
density graphics. The correct number of
graphic data bytes (ml, m2, etc.) must follow
n2. The ASCII value of these characters deter-
mine which pins are fired for each character.
Chapter 12
Print double-density graphics with double-
Speed*
(ESC) "y" nl n2 ml m2 m3...
27
121 nl n2 ml m2 m3...
1B 79 nl n2 ml m2 m3...
This command selects 120 dots-per-inch, col-
umn-scan, bit-image graphics mode with
double-speed. The values of n 1 and n2 are the
same as in normal density graphics. The cor-
rect number of graphic data bytes (ml, m2,
etc.) must follow n2. The ASCII value of these
characters determine which pins are fired for
each character.
Chapter 12