Table of Contents
Advertisement
Getting to Know Your Radix
11
Pause button and hold down the LF button until the paper
moves smoothly into position.
Figure l-8. With the tractors in place, you're ready to close the covers and advance
the paper.
9. Close the bail lever (push away from you). The top edge of the
paper should line up with the cutter edge of the front cover so
that printing will start one inch from the top edge.
Ribbon Installation
This is described in two places: installation of the ribbon car-
tridge is explained in Appendix A; replacing the ink ribbon inside
the ribbon cartridge casing is described in Chapter 14 ("Mainte-
nance").
-
Advertisement
Table of Contents
