Table of Contents
Advertisement
Function Code Reference
307
PURPOSE:
CODE:
(decimal ASCII)
(hex ASCII)
REMARKS:
REFERENCE:
PURPOSE:
CODE:
(decimal ASCII)
(hex ASCII)
REMARKS:
REFERENCE:
Chapter 10
PURPOSE:
CODE:
(decimal ASCII)
(hex ASCII)
REMARKS:
Set printer off line.
(DC3)
19
13
This command causes the printer to set itself
off line, disregarding all subsequent charac-
ters and function codes, with the exception of
( DCl), which will return the printer to an on
line state. This is not the same as pushing the
ON-LINE button. When the ON-LINE light is
out the printer will not respond to ( DCl).
Chapter 10
REFERENCE:
Accept the value of the eighth data bit as is.
(ESC)
"#"
27
35
1B
23
This command cancels either setting of the
eighth data bit. The printer will use the value
of the eighth data bit that is sent from the
computer. This code allows users with a '/-bit
interface
to resume normal functions
after
accessing
those characters
whose
ASCII
code is greater than 127.
Chapter 10
Delete the last character
sent.
(DEL)
127
7F
This command deletes the last character re-
ceived. This command is ignored if the last
character received has already been printed,
or if the last character received was all or part
of a function code.
Advertisement
Table of Contents
