Vertical Position Commands - Star Micronics NX-1020 User Manual

Select character height, width, and line spacing
Mode ASCII
Decimal Hexadecimal
IBM
<ESC> "[" "@I"
~47 <O>
27
91 64 4 0 10 50 40 04 00
CO7 CO7
n m 0 0 nm
WOO
nm
Selects a combination of character height, width, and line spacing
according to the value of rr and m, as below. Does not move the base
line.
n Line spacing
Character height -
0 Unchanged
Unchanged
1
Unchanged
Single height
2 Unchanged Double height
16 Single Unchanged
17 Single
Single height
18 Single Double height
32 Double Unchanged
33 Double
Single height
34 Double
Double height
m
Character width
1 Single width (same as <ESC> "W" 0)
2 Double width (same as cESC> "w" 1)
Double-height characters are always printed at near letter quality.
Double height printing temporarily cancels the super/subscript and
condensed printing modes, but these modes resume when the
printer returns to normal height.
VERTICAL POSITION COMMANDS
Set line spacing to I/8 inch
Mode ASCII
Decimal Hexadecimal
Both
cEsc7
"0"
27
48 10 30
Sets the distance the paper advances or reverses in subsequent line
feeds to l/8 inch.