Table C-2 Apple Parallel Cable - Star Micronics Radix User Manual

196
Radix User's Manual
,v --
Radix
'in No. Function
25 SIG GND
26 SIG GND
27 SIG GND
1 STROBE
26 SIG GND
2 DATA1
3 DATA2
4 DATA3
5 DATA4
6 DATA5
7 DATA6
a
DATA7
9 DATA8
10 ACK
29 SIG GND
Table C-2
Apple parallel cable
Apple Board
Pin No. Function
1 SIG GND
2 SIG GND
3 SIG GND
4 STROBE
5 N/C
6 DATA1
7 DATA2
a DATA3
9 DATA4
10 DATA5
11 DATA6
i2 DATA7
13 DATA8
14 ACK
15 SIG GND
Applesojl BASIC
The Apple II computer, using Applesoft BASIC, does not
have different types of PRINT statements for the screen and
printer. You must add commands to your programs that direct the
output of the PRINT statements to the printer. To direct output to
the printer (with the interface board in slot
#l)
you must use the
PR#
1
command. Depending on the version of Applesoft BASIC
that you are using this command can take various forms. It is usu-
ally one of the following:
18 PR# 1
or
18 PRINT "( Ctrl-D)PR#l"
:t; PRINT
W@(4)
"PR#l"
To return output to the screen, the command is PR# 0, in the
same form that works for PR# 1.
-
-