Vertical Position Commands - Star Micronics NX-1000 User Manual

Select character height, width, and line spacing
Mode ASCII
Decimal Hexadecimal
<ESC> "["
"@"
<4> 27 91 64 4 1B 5B 40 04
Both
<o> <o> <o> n
0 0 0
n 00 00 00 n
m m m
Selects a combination of character height, width, and line spacing ac-
cording to the value of
n
and m, as below. Does not move the base line.
Unchanged
Unchanged
Double
Character height
Unchanged
Single height
Double height
Unchanged
Single height
Double height
Unchanged
Single width (same as < ESC > "W" 0)
Double width (same as < ESC > "W" 1)
Double-height characters are always printed at near letter quality. Double
height printing temporarily cancels the super/subscript and condensed
printing modes, but these modes resume when the printer returns to
normal height.
VERTICAL POSITION COMMANDS
Set line spacing to l/8 inch
Mode ASCII
Decimal Hexadecimal
Both t <ESC>
"0" 1 27 48 IlB 30
-
Sets the distance the paper advances or reverses in subsequent line feeds
to l/8 inch.