Star Micronics Radix User Manual page 22

8
Radix User's Manual
Figure
l-5. The metal guide is used to align the left margin.
-
4. Rutting the left edge of the sheet against the metal guide, insert a
sheet into the paper chute until the bottom edge of the paper
_
touches the paper stopper. (The set position of the release lever
permits you to get the paper in straight.)
-
5. Now, push the release lever away from you to the "friction"
position. This grips the paper securely for proper feeding.
6. Make sure that the bail is resting against the platen (you should
push the bail lever away from the front of the printer). Radix
will automatically lift it out of the way at the proper time!
7. With the power on, press the Feed button, and the paper auto-
maticaIIy moves around the platen to the correct position to
start printing, just one inch from the top edge of the sheet!
Note: If you'd like to start the first line of printing lower down on
the sheet, as for letter correspondence for example, just press the