Table of Contents
Advertisement
Function Code Reference
299
PURPOSE:
CODE:
(decimal ASCII)
(hex ASCII)
REMARKS:
REFERENCE:
PURPOSE:
CODE:
(decimal ASCII)
(hex ASCII)
REMARKS:
REFERENCE:
PURPOSE:
CODE:
(decimal ASCII)
(hex ASCII)
REMARKS:
REFERENCE:
Set the right print margin.
(ESC)
"Q"
n
27
81
n
1B
51
n
This command sets the right hand print mar-
gin to print position n. After execution of this
command, any attempt to print beyond print
position n will cause the printer to automati-
cally generate a carriage return and a line
feed before printing the remainder of the line.
The value for n must be between 1 and 255.
Chapter 9
Move the print head to the next horizontal
tab position.
(HT)
9
09
This command causes the print head to ad-
vance to the next horizontal tab position. The
horizontal tab positions are set at power-on to
print positions 10, 20, 30, etc. (to the maxi-
mum print position).
Chapter 9
Set horizontal tab positions.
(ESC)
"D"
nl n2 n3...
0
27
68
nl n2 n3...
0
1B
44
nl n2 n3...
00
This command cancels all current horizontal
tab positions and sets those defined at print
positions nl, n2, n3, etc. The maximum num-
ber of horizontal tab positions allowed is 255.
The ASCII 0 character is used as a command
terminator.
Each
horizontal
tab position
must be between 1 and 255, and they must be
specified in ascending order.
Chapter 9
Advertisement
Table of Contents
