Special Print Modes - Star Micronics Radix User Manual

288
Special print modes
Radix User's Manual
PURPOSE:
Select double-strike printing.
CODE:
(decimal ASCII)
(hex ASCII)
REMARKS:
REFERENCE:
PURPOSE:
CODE:
(decimal ASCII)
(hex ASCII)
REMARKS:
REFERENCE:
PURPOSE:
Select emphasized printing.
CODE:
(decimal ASCII)
(hex ASCII)
REMARKS:
(ESC) "E"
27 69
1B
45
This command causes all subsequent charac-
ters except NLQ characters to be printed in
emphasized print. Emphasized print can
only be used with pica-sized characters, or
enlarged pica-sized characters (10 CPI and 5
CPI), and cannot be used with superscripts or
subscripts. You can select emphasized print-
ing as the power-on default by turning DIP
switch A-2 off.
REFERENCE:
(ESC)
"G"
27 71
1B
47
This command causes all subsequent charac-
ters except NLQ characters to be printed in
double-strike. Double-strike causes all charac-
ters to be printed once, the paper moved up I/
144 inch, the characters reprinted, and the
paper moved back down l/l44 inch.
Chapter 7
-.
Cancel double-strike printing.
(ES0
"H"
27 72
1B 48
This command cancels double-strike printing
and returns the printer to its previous print
style.
Chapter 7
Chapter 7