Vertical Position Commands - Star Micronics Rainbow NX-1000C User Manual

1
'1
')
1
I
]
I
I
I
I
I
I
I
I
I
I
J
.J
J
VERTICAL POSITION COMMANDS
I
Set line spacing to 1/8 inch
<27> <48>
Sets the distance the paper advances or reverses in subsequent line feeds
to 1/8 inch.
I
Set line spacing
to 7/72
inch <27> <49>
I
Sets the distance the paper advances or reverses in subsequent line feeds
to 7172 inch.
I
Set line spacing to 1/6 inch <27> <50>
I
Sets the distance the paper advances or reverses in subsequent line feeds
to
1/6
inch.
I
Set line spacing
to
n/216 inch
<27> <51> <n>
I
Sets the distance the paper advances or reverses in subsequent line feeds
to
n/216
inch, where
n
is between 1 and 255.
I
Set line spacing to n/72 inch
< 27 > < 65 > < n >
I
Sets the distance the paper advances or reverses in subsequent line feeds
to
nl72
inch, where
n
is between 1 and 255.
I
Line feed <10>
I
Prints the current line, feeds the paper to the next line, and moves the
carriage to the left margin. See the preceding commands for the line spacing.
I
Reverse line feed <27> < 10>
I
Prints the current line, feeds the paper in the reverse direction to the
preceding line, and moves the carriage to the left margin. This command
is ignored when friction feed is used. See the preceding commands for the
line spacing.
I
Perform one n/216-inch line feed <27> <74> <n>
I
Feeds the paper once by
nl216
inches, where
n
is between 1 and 255 .
Does not move the print position right or left. Does not change the
line-spacing setting.
67