Font Pitch Controls - Star Micronics Radix User Manual

284
Radix User's Manual
PURPOSE:
Cancel the NLQ character set.
CODE:
(ESC)
"B" 5
(decimal ASCII)
27 66 5
(hex ASCII)
1B
42 05
REMARKS: This command causes the printer to cancel
the NLQ character set and return to the
standard (also known as "draft") character
set.
REFERENCE: Chapter 7
Font pitch controls
-.
PURPOSE:
CODE:
(decimal ASCII)
(hex ASCII)
REMARKS:
REFERENCE:
PURPOSE:
CODE:
(decimal ASCII)
(hex ASCII)
REMARKS:
REFERENCE:
Set the print pitch to pica (10 characters/
inch).
(ESC)
"B"
1
27
66
1
1B
42 01
This command causes all subsequent print-
ing to be done in pica type. This command
also sets the maximum number of print col-
umns to 80 on the Radix-10 and 136 on the
Radix-15. You can select pica type as the
power-on default by turning DIP switch A-3
on.
Chapter 7
Set the print pitch to elite (12 characters/
inch).
-
(ESC) "B"
2
27
66
2
-
1B
42 02
-
This command causes all subsequent print-
ing except NLQ characters to be done in elite
type. This command also sets the maximum
number of print columns to 96 on the Radix-
10 and 163 on the Radix-15.
Chapter 7
-
--
-
-