Esc> "0" 1B; Vertical Tab; Set Line Spacing To 4 Mm; Set Line Spacing To 3 Mm - Star Micronics TSP600 Series Programmer's Manual

Vertical tab

FUNCTION
CODE <VT>
0B
HEX
When start position detect is invalid, feeds the paper to the next
REMARKS
vertical tab stop and moves the print position to the left margin.
If no vertical tabs are set, this command is ignored.
Performs a line feed if the current line is at or below the last vertical
tab stop.
This command is ignored when start position detect is valid.

Set line spacing to 4 mm

FUNCTION
CODE <ESC> "z"
1B
HEX
Sets the distance the paper advances in subsequent line feeds to
REMARKS
4 mm.

Set line spacing to 3 mm

FUNCTION
CODE <ESC> "0"
1B
HEX
Sets the distance the paper advances in subsequent line feeds to
REMARKS
3 mm.

One time n/4 mm feed

FUNCTION
<ESC> "J"
CODE
1B
HEX
Performs a line feed of n/4mm once only.
REMARKS
The value of n is 1 to 255.
Space setting for lines is not changed.
"1" or <ESC> "z"
7A 31 or
30
n
4A n
– 19 –
<1>
1B 7A 01