Table of Contents
Advertisement
Function Code Reference
305
PURPOSE:
Print quadruple-density
graphics.
CODE:
(ESC)
"z"
n1 n2 ml m2 m3...
(decimal ASCII)
27
122 nl n2 ml m2 m3...
(hex ASCII)
1B
7A
nl n2 ml m2 m3...
REMARKS:
This command selects 240 dots-per-inch, col-
umn-scan, bit-image graphics mode. The val-
ues of nl and n2 are the same as in normal
density
graphics.
The correct
number
of
graphic data bytes (ml, m2, etc.) must follow
n2. The ASCII value of these characters deter-
mine which pins are fired for each character.
REFERENCE:
Chapter 12
Macro Instruction Commands
PURPOSE:
CODE:
(decimal ASCII)
(hex ASCII)
REMARKS:
REFERENCE:
PURPOSE:
CODE:
(decimal ASCII)
(hex ASCII)
REMARKS:
REFERENCE:
Define macro instruction.
(ESC)
"+"
. . .
(RS)
27
43
. . .
30
1B
2B
..a
1E
This command
cancels any existing macro
instruction,
and replaces it with the instruc-
tion defined. The maximum number of char-
acters allowed in the macro instruction is 16.
The (RS)
character
marks the end of the
macro definition.
Chapter 10
Execute macro instruction.
(ES0
'L,"
27
3'3
1B
21
This command executes a macro instruction
that was previously defined.
Chapter 10
Advertisement
Table of Contents
