L633, L888 - Diver Date - Longines L602 Manual

L633, L888 – DIVER DATE
74
Hour hand
Bi-directional rotating
fl ange
Seconds hand

L633, L888
Diver Date
Your Longines Legend Diver Watch has 2 crowns, A and
DIVER
, which can be used for specifi c functions (fi g.
Shows the hours, minutes, seconds and date and also enables the
user to check his or her diving time.
Crown A: 3 positions
Adjusting the time and stop seconds
Unscrew crown A and pull it out to position 3. The seconds hand
will now stop. Adjust the time by turning the crown in either direction.
Synchronise your watch with a time signal (telephone, radio, TV) and
then push the crown A back in to position 1, and screw in fi rmly.
Adjusting the date
Unscrew crown A and pull it out to the intermediate position 2.
Turn it forwards until it shows the desired date. Push crown A
back in to position 1 and screw in fi rmly.
Book_I.indb 74
Automatic watches
Minute hand
DIVER
Stop/start crown for
the bi-directional
rotating fl ange
Date aperture
1
2
3
A
3-position
crown
DIVER
).

Verifying your diving time
Unscrew the
bidirectional ring to adjust the needle to the minute hand. Push the
crown back in again and then screw in fi rmly (fi g.
You can read off your diving time from the minute hand on the
graduations of the rotating bidirectional ring (fi g.
The example shows: 15 minutes diving time.
 
screw-in crown
DIVER crown. When you start diving turn the rotating
).

).

13.08.19 10:56