Download Print this page

Date Correction - Longines CONQUEST VHP-L287 Instruction Manual

Advertisement

CONQUEST VHP – L287
6

Date correction

Pull the crown out to position 2. Turn the crown
quickly either way, to move the hour hand forward
or backward in successive one-hour steps, without
affecting the minute and seconds displays.
When the hour hand passes midnight, the calendar
will automatically display a new date - either the next
day or the previous day, depending on the direction
of correction. Hence there is a limit of +/- 1 day, so
as not to disrupt the perpetual calendar. Push the
crown back into position 1.
End of life (E.O.L.)
and end of energy (E.O.E.)
The watch indicates that the battery is reaching
its end of life via one of its hands jumping every
5  seconds. After approximately six months in this
mode, the watch will switch to E.O.E. mode: the
hands will stop at 12 o'clock. If the watch battery
is replaced in E.O.L. mode or within six months of
switching to E.O.E. mode, you will not need to adjust
the perpetual calendar. If however the battery is
replaced after this period, an approved watchmaker
will need to program the perpetual calendar.
Using the V.H.P. GMT
Flash Setting app
Download the V.H.P. GMT Flash Setting app
www.longines.com/watches/flashsetting
Start the tutorial
Set the home and/or travel times on the app
You will be notified of the update(s) directly on your
smartphone.

Advertisement

loading