Deployment Buckle - Longines L602 Manual

DEPLOYMENT BUCKLE

64
Adjusting the clasp
1. Release the adjusting mechanism by
removing the pin from the hole in the
long section of the strap.
2. Slide the mechanism along this long
section and then fix it by reinserting the
pin in the desired hole.
Opening the clasp
3. To open the clasp press in the push-
pieces on either side simultaneously.
4. Open the clasp to enlarge the bracelet
and remove the watch from your wrist.
Book_I.indb 64
Closing the clasp
5. Put the bracelet on your wrist and
slide the long section through the small
fixed buckle.
6. Close the folding clasp until it clicks
into place. If necessary, slide the long
section through the small mobile buckle.
13.08.19 10:56