Longines L602 Manual page 79

Note the day of the week indicated on the dial.
Pull the crown out to position 2 (Quick time adjustment) and
turn it clockwise until the hour hand has completed one circle.
Push the crown back in to position 1 (Winding).
Check that the day of the week has changed.
If so, the watch will now indicate morning (a.m.). If the watch
indicates morning but it is in fact afternoon pull the crown out to
position 2 (Quick time adjustment) and turn it until the hour hand
has completed one circle.
If, however, the day of the week has not changed, the watch will
indicate afternoon (p.m.). If the watch indi-cates afternoon but it is in
fact morning pull the crown out to position 2 (Quick time adjust-
ment) and turn it until the hour hand has completed one circle.
Push the crown back in to position 1 (Winding).
IMPORTANT! You will not see any changes
on the dial when using the crown in
positions 2 and 3.
24-hour indicator:
if you do not wish to use the Second time
zone function you can convert it into a 24-hour indicator. This will
enable you to avoid this step in the future.
See under: Synchronising the time in a second time zone /
24-hour indicator.
Book_I.indb 79
The functions of the 3 push-pieces
The 3 push-pieces can be used when the crown is in any position.
Adjusting the day of the week
Press push-piece to adjust the day of the week.
A
IMPORTANT! Do not change the date or
use the push-pieces A (for the day) or B
(for the date) between 9 p.m. and 3 a.m. as
doing so may damage the mechanism.
Adjusting the date
Press push-piece to adjust the date.
B
L707
79
Automatic watches
13.08.19 10:56