Longines L602 Manual page 96

L538
96
Quartz chronographs
SPLIT-SECONDS function or intermediate time
• Press push-piece A at the start of the event you wish to time,
for example a ski race.
• Press push-piece B to see the first intermediate time; the
60-second and 30-minute counter hands will stop, and the 1/10
of a second counter hand will move to the measured tenth.
• Press push-piece B again; the chronograph hands will jump to
the time elapsed since the start of the race.
Book_I.indb 96
START 1
Time-setting crown in
position 1
SPLIT 1 2
Read time 1
– 5 minutes
– 4 secs
– 6/10 of a sec.
ths
RESTART 3
(catchup)
th
SPLIT 2 4
Read time 2
– 15 minutes
– 24 secs
– 8/10 of a sec.
ths
RESTART 5
(catchup)
STOP 6
Read last time
– 25 minutes
– 18 secs
– 4/10 ths of a sec.
7
Reset
To see the second intermediate time, repeat the procedure:
• Press push-piece B once to see the second intermediate time
measured to 1/10 th of a second, and again to make the chrono-
graph hands catch up to the elapsed time.
• At the end of the race, press push-piece A to make the chrono-
graph display the total race time.
• Press push-piece B to reset.
NOTE: The split/intermediate times function can also be used
to record consecutively the times of various competitors as they
finish a race.
1 7
from to
order of functions.
13.08.19 10:57