Mimic Display Driver Ft2001-A1 - Siemens FS720 Commissioning, Maintenance, Troubleshooting

Updating the firmware
22
Updating the FW of the peripheral devices

22.8.4 Mimic display driver FT2001-A1

136 | 178
Building Technologies
Fire Safety
WARNING
Incorrect assignment between detector/detector zone and customer text
Misleading messages in the event of an alarm
● Never change the wiring during the firmware update.
The firmware must be updated individually for each mimic display driver.
Preparation
w The mimic display driver is fed by a 24 V external power supply or by the C-
NET detector line.
w The driver for the MCL-USB adapter FDUZ221 or FDUZ227 is installed on the
PC.
1. Select 'File' > 'Import new resource package'.
2. In the selection window, open an F-FXS7211-XX_x_x_...zip file matching the
↑ 'Site'.
3. Connect the PC to the device via the MCL-USB adapter.
FT2001-A1
X2
Figure 6: Connection of the PC to the mimic display driver
MCL-USB adapter (interface USB/MC-LINK)
FDUZ221 /
FDUZ227
X2 Connection for the MCL-USB adapter
FT2010 Mimic display driver
USB
MC-Link
FDUZ221/FDUZ227
A6V10210416_j_en_--
2018-08-29