Commissioning External Printer - Siemens FS720 Commissioning, Maintenance, Troubleshooting

Commissioning external printer

21
21 Commissioning external printer
110 | 178
Building Technologies
Fire Safety
The external FUJITSU DL3750+ printer can be installed and commissioned using
the operating manual. The operating manual is on the CD delivered with the
printer.
To operate the printer on the fire detection system FS720 settings that differ from
the default values must be made in the following functions.
● 'MENU 1': Assignment of print functions to MENU1 in the printer Person
Machine Interface.
● 'MENU 2': Assignment of print functions to MENU2 in the printer Person
Machine Interface.
● 'HARDWRE': Changing the printer hardware options.
● 'ADJUST': Changing the setting options for the print position.
● 'CONFIG': Changing the configuration options.
The printer must be set to configuration mode in order to do this. You will find
information on this in document A6V10224853. See chapter 'Applicable
documents'. The following table shows the options to be set.
MENU 1
Function
EMULATE
FONT
QUALITY
PITCH
LINE SP
CHAR-W
CHAR-H
ATTRIB
PAGE LG
LFT-END
TOP-MRG
LANGUAGE
CHR-SET
AGM
PRF-SKP
ZEROFNT
CR-CODE
LF-CODE
RGHTEND
==END==
Value
XL24E
COUR 10
LETTER
10 CPI
6 LPI
NORMAL
NORMAL
NONE
12.0 IN
1 COLM
1 LINE
LATIN-9
SET1
OFF
NO-SKIP
NO-SLSH
CR ONLY
LF & CR
WRAP
A6V10210416_j_en_--
2018-08-29