Siemens FS720 Commissioning, Maintenance, Troubleshooting page 14

About this document
1
Revision history
Version Edition date
i 2015-12-15
h 2014-01-13
14 | 178
Building Technologies
Fire Safety
Brief description
Edition for IP6
New:
Converting a standalone station to a networked station
Commissioning Ethernet switch (modular) FN2012-A1
Updating the FW of the FN2012-A1 Ethernet switch (modular)
Freezing outputs
Enabling frozen outputs
Switching off, Safety during switch-off, Switching on
Cyber security disclaimer
Network parameters
Fiber-optic network module FN2006 / FN2007 troubleshooting steps
Revised:
Chapter structure
Referenced documents updated
Disconnecting 'Station' from the power supply
Merging two 'Sites'
Loading data to the 'Station'
Loading configuration from the PC to the 'Station'
Loading configuration from the 'Station' to the PC
Creating a backup of the 'Site' configuration
Preparing 'Station' for commissioning –without BDV installation
Loading automatically created configuration to the PC
Completion work
Permanently removing stationary devices
Restart 'Station'
Restoring factory setting on the 'Station'
'Updating the firmware' chapter revised and restructured
Information regarding freezing outputs added to chapters 'Loading configuration
from the PC to the 'Station'' and 'Restarting the detector line'
Initializing 'Station'
Switching off the detector line, Switching off a zone
FDUZ227 added to various chapters: May be used instead of FDUZ221
A6V10210416_j_en_--
2018-08-29