Networkable fire terminal
4.5
Mimic display driver
FT2001-A1
F50F410
38
Building Technologies
Fire Safety
Mimic display driver
Application
The FT2001-A1 has 2x24 outputs for LED activation for mimic display panels.
The mimic display driver is a C-NET device and can be operated in loops or stub lines.
Features
2 control outputs for 'Local buzzer' and 'LED operation'
–
2 inputs for 'Switch-off buzzer' and 'Lamp test'
–
–
integrated line separator
Power supply via C-NET, separate 24 V power supply possible
–
Connection to LED via flat cable F50F410 (50-wire, 24 red LEDs, cable length 1 m, must be ordered
–
separately).
Technical data
Operating voltage
Operating current
Quiescent current
External supply input
Outputs
'Operating LED'
–
'Local buzzer'
–
Operating temperature
Storage temperature
Humidity
Communication protocol
Connection terminals
Protection category
Dimensions (W x H x D)
Approvals VdS / LPCB
LED flat cable 50-wire, with 24 red LEDs
Application
Two F50F410 LED cables can be connected directly to the mimic display driver to offer a total of 48
(2x24) red LEDs.
Features
The LEDs can be easily configured via the configuration tool.
–
Technical data
Cable length
LED
Part no.
A5Q00014417
Product data sheet
A6V10082691
DC 12...32 V
Max. 45 mA
Max. 5 mA
DC 14...32 V, galvanically isolated
AC 11...22 V, galvanically isolated
Max. 2.5 mA und 2.5 VDC
Max. 5 mA und 12 VDC
0...+40 °C
-20...+60 °C
≤95 % rel.
C-NET
2
0,08...1,5 mm
IP30 (3rd party housing)
106 x 200 x 45 mm
G208044 / 126bp/01
Part no.
BPZ:5291410001
1 m
24 (red)
A6V10227652_i_en_--
2016-05-30