17.4 Restarting and resetting the FN2012-A1
Building Technologies
Fire Safety
Via the web interface
You can perform the following resets on the 'Product' tab:
●
Restart device: Click on 'Reset device'.
–
The configuration is retained.
●
Resetting the device to factory settings: Click on 'Factory reset'.
On the device
●
Restart device: Press the RESET button.
–
The configuration is retained.
●
Resetting the device to factory settings: Press the RESET button for >5 s but
<10 s.
Resetting the FN2012-A1 to the factory setting automatically activates all ports.
The FN2012-A1 has no IP address in the factory setting.
Commissioning Ethernet switch (modular) FN2012-A1
Restarting and resetting the FN2012-A1
17
97 | 178
A6V10210416_j_en_--
2018-08-29