Siemens FS720 Commissioning, Maintenance, Troubleshooting page 164

Repair
24
Restoring factory setting on the 'Station'
164 | 178
Building Technologies
Fire Safety
PMI & mainboard FCM2027
1. NOTICE! Configuration will be deleted! Save the configuration data for the
↑ 'Station' before restoring the factory setting.
2. WARNING! It is impossible to acquire and process alarms or faults without a
site configuration! Keep the 'S32' button on the rear of the operating unit
pressed and simultaneously press <Reset> on the ↑ Person Machine Interface
until the 'Station' restarts (>2 s).
a The Station restarts.
3. Enter the date and time. To do this, select the 'Settings/administration' >
'System commands' > 'Set system time' menu items.
A6V10210416_j_en_--
2018-08-29