Network Parameters - Siemens FS720 Commissioning, Maintenance, Troubleshooting

Connectivity and communication with 'Station'
4

Network parameters

4.2 Network parameters
Use
Communication
Station-to-station
communication
Communication between
Engineering Tool and
station
Communication between
management station and
FS720 station
Monitoring
Station to station
Remote access via cRSP
Between Engineering Tool
and station
Firmware update
Engineering tool
Panel
Engineering tool
Engineering tool
26 | 178
Building Technologies
Fire Safety
5. Set the following values:
– 'Protocol type': 'UDP'
– 'Local port': 'Specific Ports', and enter the value range '50067-50070' in the
box.
– 'Remote port': 'All Ports'
6. Confirm with 'OK'.
a The new firewall rule is now configured.
NOTICE
Security vulnerability in operating system due to open ports
Unauthorized access to your PC
● Deactivate the firewall rule configured above after the firmware update.
Ports in FS720
Port number Transport
protocol
50501 UDP
51000 UDP
47808-47823 UDP
50502 UDP
51001-51250 UDP
50067 UDP
50068 UDP
50069 UDP
50070 UDP
Application Comment
protocol
C-WEB
C-WEB
BACnet ● Dependent on configuration
● Between BAC0 and BACF by
default
C-WEB
C-WEB ● Dependent on configuration
● Rule for ports: portHost =
51000 + hostID
FW update
FW update
FW update
FW update
A6V10210416_j_en_--
2018-08-29