Floor Repeater Display Ft2011 - Siemens FS720 Commissioning, Maintenance, Troubleshooting

Updating the firmware
22
Updating the FW of the peripheral devices

22.8.3 Floor repeater display FT2011

134 | 178
Building Technologies
Fire Safety
WARNING
Incorrect assignment between detector/detector zone and customer text
Misleading messages in the event of an alarm
● Never change the wiring during the firmware update.
The firmware must be updated individually for each ↑ floor repeater display.
Preparation
w The floor repeater display is fed by a 24 V external power supply or by the C-
NET detector line.
w The driver for the MCL-USB adapter FDUZ221 or FDUZ227 is installed on the
PC.
1. Select 'File' > 'Import new resource package'.
2. In the selection window, open an F-FXS7211-XX_x_x...zip file that matches the
↑ 'Site'.
3. Open the device and connect the PC via the MCL-USB adapter to the device.
FT2011
X100
24 V
Figure 5: Connect the PC to the floor repeater display
FDUZ221 / MCL-USB adapter (interface USB/MC-LINK)
FDUZ227
X100 Connection for the MCL-USB adapter
FT2011 Floor repeater display
USB
MC-Link
FDUZ221/FDUZ227
A6V10210416_j_en_--
2018-08-29