Handling Precautions For Electrical Parts And Wiring; Wiring - Kubota M108S Workshop Manual

M108S, WSM
3. HANDLING PRECAUTIONS FOR ELECTRICAL PARTS
AND WIRING

[1] WIRING

To ensure safety and prevent damage to the machine and
surrounding equipment, heed the following precautions in handling
electrical parts and wiring.
IMPORTANT
• Check electrical wiring
connection every year. To this end, educate the customer to
do his or her own check and at the same time recommend
the dealer to perform periodic check for a fee.
• Do not attempt to modify or remodel any electrical parts and
wiring.
• When removing the battery cables, disconnect the negative
cable first. When installing the battery cables, connect the
positive cable first.
(1) Negative Terminal
• Securely tighten wiring terminals.
(1) Correct
(Securely Tighten)
• Do not let wiring contact dangerous part.
(1) Dangerous Part
(2) Wiring (Incorrect)
• Repair or change torn or aged wiring immediately.
(1) Aged
(2) Torn
G-3
G GENERAL
for damage and loosened
(2) Positive Terminal
W1011114
(2) Incorrect
(Loosening Leads to Faulty Contact)
W1011216
(3) Wiring (Correct)
(4) Dangerous Part
W1011313
(3) Insulating Vinyl Tape
W1012292
KiSC issued 06, 2007 A