Kubota M108S Workshop Manual page 294

M108S, WSM
Backlash between Differential Pinion and Differential Side Gear
1. Set a dial indicator (lever type) on the tooth of the differential
pinion.
2. Hold the differential side gear and move the differential pinion to
measure the backlash.
3. If the measurement is not within the factory specifications, adjust
with the differential side gear washer.
Factory spec.
Backlash between
differential pinion and
differential side gear
Allowable limit
(Reference)
• Thickness of differential side gear washer:
1.5 mm (0.059 in.) 1.7 mm (0.067 in.)
1.6 mm (0.063 in.)
(1) Side Gear Washer
Clearance of Differential Lock Shifter
1. Measure the clearance (A) between differential lock shifter and
differential case when the differential lock pedal does not
operate.
2. If the measurement is not within the factory specifications, adjust
with adjusting shim (2).
Clearance (A) Factory spec.
(Reference)
• Thickness of adjusting shim (2): 0.5 mm (0.020 in.)
(1) Plug
(2) Adjusting Shim
3-S48
TRANSMISSION
0.15 to 0.30 mm
0.0059 to 0.011 in.
0.40 mm
0.016 in.
W1050323
1.0 to 2.0 mm
0.040 to 0.078 in.
1.0 mm (0.039 in.)
(3) Shift Fork
(4) Differential Lock Shifter
W1050884
KiSC issued 06, 2007 A