Disassembling And Assembling; Separating Cabin From Tractor - Kubota M108S Workshop Manual

Hide thumbs Also See for M108S:

Table of Contents

[2] DISASSEMBLING AND ASSEMBLING

Draining Coolant

• Never remove the radiator cap until coolant temperature is

well below its boiling point. Then loosen cap slightly to the

stop to relieve any excess pressure before removing cap

1. Stop the engine and let cool down.

2. To drain the coolant, open the radiator drain plug (1).

3. Remove the radiator cap to completely drain the coolant.

4. After all coolant is drained, reinstall the radiator drain plug.

(1) Drain Plug

Preparation 1

1. Open the bonnet (2) and disconnect the battery (3) negative

terminal and head light 4P connector (7).

2. Remove the bonnet dampers (4) and close the bonnet (2).

3. Remove the bonnet hinge mounting screws (6) through the holes

(5) in the upper part of the bonnet.

4. Remove the bonnet (2) and muffler (1).

5. Remove the side cover LH and RH.

• When disconnecting the battery cables, disconnect the

grounding cable first. When connecting, positive cable first.

(7) 4P Connector

KiSC issued 06, 2007 A

Table of Contents