Kubota M108S Workshop Manual page 297

M108S, WSM
1. STRUCTURE
(1) Rear Axle
(2) Rear Axle Case
(3) Planetary Gear Support
(4) Bearing
The rear axles are the final mechanism which transmits power from the transmission to the rear wheels. Direction
of power transmitted is changed at a right angle by the differential gear and, at the same time, speed is reduced. It is
further reduced by the planetary gear (6) to drive the rear axles (1).
The rear axles (1) are semi-floating type with the ball bearing between the rear axle (1) and rear axle case (2),
which support the rear wheel load as well as transmitting power to the rear wheel. They withstand all the forces
caused by tire rotation and side skidding.
NOTE
• Refer to "4. REAR AXLE" section in the workshop manual of tractor mechanism (Code No. 9Y021-18201).
(5) 56T Internal Gear
(6) 21T Planetary Gear
(7) Differential Lock Shift Fork
(8) Differential Case
(9) Differential Side Gear
(10) Differential Pinion Gear
(11) 35T Bevel Gear
(12) Differential Pinion Shaft
4-M1
REAR AXLE
(13) Differential Lock
(14) Brake Case
(15) Brake Shaft (13T)
KiSC issued 06, 2007 A