Kubota M108S Workshop Manual page 207

M108S, WSM
Brake Oil Tank, Joint Shaft and Power Steering Hose
1. Remove the brake oil tank (1).
2. Remove the power steering delivery hose (2).
3. Remove the joint shaft (3).
(When reassembling)
Power steering turning
Tightening torque
hose retaining nut
(1) Brake Oil Tank
(2) Power Steering Delivery Hose
Heater Hose, Fuel Pipe and Connectors
1. Disconnect the connector (1).
2. Disconnect the heater hoses (3) and fuel hose (4).
3. Remove the throttle cable (2).
4. Disconnect the connectors (5).
(1) Connector
(2) Throttle Cable
(3) Heater Hose
2-S12
CLUTCH
22 to 27 N·m
2.2 to 2.8 kgf·m
16 to 20 lbf·ft
(3) Joint Shaft
W1013761
(4) Fuel Hose
(5) Connector
W1014081
KiSC issued 06, 2007 A