B1710 · B2110 · B2410 · B2710, WSM
4. HANDLING PRECAUTIONS FOR ELECTRICAL PARTS
AND WIRING
[1] WIRING
To ensure safety and prevent damage to the machine and
surrounding equipment, heed the following precautions in handling
electrical parts and wiring.
IMPORTANT
• Check
electrical
wiring
connection every year. To this end, educate the customer to
do his or her own check and at the same time recommend
the dealer to perform periodic check for a fee.
• Do not attempt to modify or remodel any electrical parts and
wiring.
• When removing the battery cables, disconnect the negative
cable first. When installing the battery cables, connect the
positive cable first.
(1) Negative Terminal
• Securely tighten wiring terminals.
(1) Correct
(Securely Tighten)
• Do not let wiring contact dangerous part.
(1) Dangerous Part
(2) Wiring (Incorrect)
• Securely insert grommet.
(1) Grommet
G-4
G GENERAL
for
damage
and
loosened
(2) Positive Terminal
W10111140
(2) Incorrect
(Loosening Leads to Faulty Contact)
W10112160
(3) Wiring (Correct)
(4) Dangerous Part
W10113130
(A) Correct
(B) Incorrect
W10113880
KiSC issued 11, 2006 A