Kubota M108S Workshop Manual page 341

M108S, WSM
Adjusting Front Axle Pivot
1. Jack up the tractor body, then loosen the lock nut (2).
2. Measure the adjusting screw tightening torque.
3. If tightening torque is not within the factory specifications, adjust
the adjusting screw (1).
4. After adjustment, tighten the lock nut (2) firmly.
Front axle pivot adjusting
screw
Tightening torque
Lock nut
(1) Adjusting Screw
Adjusting King-pin Pivot (4WD)
1. Jack up the tractor, then loosen the lock nut (2).
2. Measure the adjusting screw (1) tightening torque.
3. If tightening torque is not within the factory specifications, adjust
the adjusting screw (1).
4. After adjustment, tighten the lock nut (2) firmly.
Adjusting screw
Tightening torque
Lock nut
(1) Adjusting Screw
6-S5
FRONT AXLE
20 to 29 N·m
2.0 to 3.0 kgf·m
15 to 21 lbf·ft
98.1 to 147 N·m
10.0 to 15.0 kgf·m
72.4 to 108 lbf·ft
(2) Lock Nut
W1012987
4.9 to 9.8 N·m
0.50 to 1.0 kgf·m
3.7 to 7.2 lbf·ft
98.1 to 147.0 N·m
10.0 to 15.0 kgf·m
72.4 to 108 lbf·ft
(2) Lock Nut
W1013116
KiSC issued 06, 2007 A