Lubricants, Fuel And Coolant - Kubota M108S Workshop Manual

M108S, WSM

4. LUBRICANTS, FUEL AND COOLANT

Place
1 Fuel tank
Engine block
radiator
2 Coolant
Recovery
tank
3 Washer liquid
4 Engine crankcase (with filter)
5 Transmission case
Brake system
6
(Reservoir and lines)
7 Front differential case oil
8 Front axle gear case oil
* KUBOTA original transmission hydraulic fluid.
** PAG : Polyalkyleneglycol (Synthetic oil)
Capacity
175 L
46.2 U.S.gals
38.4 lmp.gals
9.6 L
10 U.S.qts
8.4 lmp.qts
1.1 L
1.2 U.S.qts
0.97 lmp.qts
1.3 L
1.4 U.S.qts
1.1 lmp.qts
10.7 L
11.3 U.S.qts
9.41 lmp.qts
60.0 L
63.4 U.S.qts
52.7 lmp.qts
0.3 L
0.32 U.S.qts
0.26 lmp.qts
7.0 L
7.4 U.S.qts
6.2 lmp.qts
3.5 L
3.7 U.S.qts
3.1 lmp.qts
G-7
G GENERAL
Lubricants, fuel and coolant
No. 2-D diesel fuel
No. 1-D diesel fuel if temperature is
below −10 °C (14 °F)
Fresh clean water with anti-freeze
Automobile washer liquid
Engine oil: API service classification:
CF or better (EGR type engine)
Below 0 °C (32 °F) :
SAE10W, 10W-30 or 15W-40
0 to 25 °C (32 to 77 °F):
SAE20, 10W-30 or 15W-40
Above 25 °C (77 °F):
SAE30, 10W-30 or 15W-40
KUBOTA UDT or KUBOTA SUPER
UDT fluid*
KUBOTA UDT or SUPER UDT fluid*
or Turbine oil 32 (see below)
[regular type, multipurpose straight
mineral oil
Mobile DTE Oil #32
TEXACO Regal Oil #32
CHEVRON-GST Oil #32
TERESSO Oil #32]
Never use automotive brake oil.
KUBOTA UDT or KUBOTA SUPER
UDT fluid* or SAE80, 90 gear oil
KiSC issued 06, 2007 A