Kubota M108S Workshop Manual page 2

This Workshop Manual has been prepared to provide servicing personnel with
information on the mechanism, service and maintenance of M108S. It is divided into
three parts, "General", "Mechanism" and "Servicing".
General
Information on the tractor identification, the general precautions, maintenance check
list, check and maintenance and special tools are described.
Mechanism
Information on the construction and function are included. This part should be
understood before proceeding with troubleshooting, disassembling and servicing.
Refer to Diesel Engine / Tractor Mechanism Workshop Manual (Code No. 9Y021-
01874 / 9Y021-18201) for the one which has not been described to this workshop
manual.
Servicing
Information on the troubleshooting, servicing specification lists, tightening torque,
checking and adjusting, disassembling and assembling, and servicing which cover
procedures, precautions, factory specifications and allowable limits.
Regarding the failures of Common Rail System (CRS), refer to "DIAGNOSIS
MANUAL (CD-ROM)" at the end of this manual.
All information illustrations and specifications contained in this manual are based on
the latest product information available at the time of publication.
The right is reserved to make changes in all information at any time without notice.
Due to covering many models of this manual, information or picture being used have
not been specified as one model.
© KUBOTA Corporation 2007
TO THE READER
May 2007
KiSC issued 06, 2007 A