Kubota M108S Workshop Manual page 303

M108S, WSM
Rear Wheel and 3-Points Hitch
1. Set the front axle rocking restrictor (refer to "8. SPECIAL
TOOLS" at "G. GENERAL" section) (1) to the front axle.
2. Place the disassembling stand under the transmission case.
3. Remove the rear wheel (2).
4. Remove the lifting rod (3) and lower link (4) with stabilizer (5).
(When reassembling)
Tightening torque Rear wheel mounting nut
(1) Front Axle Rocking Restrictor
(2) Rear Wheel
(3) Lift Rod
Fuel Tank
(When removing the brake case LH)
1. Remove the hose cover (1) and hose (2).
2. Remove the fuel tank band (3).
3. Remove the tank (4).
(1) Hose Cover
(2) Hose
4-S5
REAR AXLE
344 to 402 N·m
35.0 to 41.0 kgf·m
254 to 296 lbf·ft
(4) Lower Link
(5) Stabilizer
W1011956
(3) Fuel Tank Band
(4) Fuel Tank
W1012383
KiSC issued 06, 2007 A