Kubota M108S Workshop Manual page 39

M108S, WSM
2) Brake Pedal Stroke and Difference between Right and Left
Pedal Strokes
CAUTION
• When checking, park the tractor on flat ground, and stop the
engine.
1. Disengage the brake pedal lock.
2. Step on either side brake pedal and measure the level difference
(pedal stroke) between right and left pedals.
3. Do the same for the other side.
4. If the pedal stroke exceeds the factory specification, check the air
bleeding, master cylinder, equalizer or brake case.
Brake pedal stroke Factory spec.
Difference between left
and right brake pedal Factory spec.
stroke
(1) Brake Pedal LH
(2) Brake Pedal RH
(3) Brake Pedal Lock
3) Equalizer Working Level
1. Gently step on both the right and left pedals at once with your
both feet. Step on the right pedal all the way (the left pedal rises).
Measure the level difference between the two pedals.
2. Next step on the left pedal all the way and measure the level
difference.
3. If the measurement is not within the factory specification, check
the equalizer (3).
Level difference
Factory spec.
between two pedals
(1) Brake Pedal
(2) Master Cylinder
G-22
G GENERAL
Less than 100 mm
3.94 in.
0 to 5 mm
0 to 0.20 in.
A : Pedal Stroke
W1044545
Less than 10 mm
0.39 in.
(3) Equalizer
W1045198
KiSC issued 06, 2007 A