Main Gear Shift - Kubota M108S Workshop Manual

M108S, WSM

[2] MAIN GEAR SHIFT

Checking Function of Main Gear Shift and Swing Shift (HI-LO)
1. Check the function of the main gear shift and swing shift (HI-LO).
- Neutral position to 1st gear position.
- Neutral position to 2nd gear position.
- Neutral position to 3rd gear position.
- Neutral position to 4th gear position.
- Swing shift switching condition (HI-LO).
2. If shifting is not smooth, check the length of main shift rod 1 (1),
main shift rod 2 (2) and the installation of the select cable (3).
• Length of rod
Length of main shift rod
1 (L1) between both Factory spec.
ends of the rod
Length of main shift rod
Initial adjustment
2 (L2)
• Check and adjust points of the select cable (3).
- (A) : Tighten until the bottoms up thread (7).
- (B) : Approx. 3.0 mm (0.12 in.) of thread
- (C) : The clearance between link (4) and plate (5) to 3.0 mm
(0.12 in.) by adjusting (D) part.
(1) Main Shift Rod 1
(2) Main Shift Rod 2
(3) Select Cable
(4) Link
3-S9
TRANSMISSION
489 mm
19.3 in.
120 mm
4.72 in.
(5) Plate
(6) Swing Shift Switch
(7) Thread
W1016897
KiSC issued 06, 2007 A