Create A Cut Contour Mark - MUTOH VC-600 User Manual

ValueCut USER MANUAL

8.9.5 Create a cut contour mark

In the aftermath of "8.9.3. Create data of the contour cut line" on the previous page, this is how to create
a contour cut mark.
a
b
c
d
e
f
V5a 2015 Jan
1
2
3. Set up in the Design Central window as follows:
a. Select "Mutoh 4 Point Positioning".
b. Set up length from the object to the mark. Generally,
leave "0".
c. Set up copies longways. "1" is applied for this time.
d. Set up copies widthways. "1" is applied, too.
e. Set up a interval of the copies. It's not necessary for this
time.
f. Click on
FlexiSTARTER Quick Start Guide
1. Select "Contour Cut Mark" from the
Effects menu.
"If "Contour Cut Mark" is not active
from the Effect s menu, select the
contour.
2. The contour cut mark may be created.
Assign a kind of the mark from the
Design Central window. This time, Mutoh
4 Point Positioning is applied.
to confirm the cut contour mark.
85