Replacing The Tool Carriage - MUTOH ValueCut VC-600 Maintenance Manual

MAINTENANCE MANUAL
Note: When re-installing the Pinch Roller Set, the Cam Roller must be aligned squarely to the
Square Bar.
Note: When aligning the Cam Roller please remember to keep the release grip locked down.
Release Grip
Cam Roller
Note: Pinch-roller is color-coded by pressure force. When replacing the pinch-roller, make sure to
replace all the pinch-rollers with the same color.

Replacing the Tool Carriage

The following are those you must follow to successfully replace the Tool Carriage.
To Loosen the Carriage Belt:
Retaining Screws
Adjustment Screw
1. Unscrew the 2 retaining screws, but don't remove them. Then turn the Adjustment
Screw anti-clockwise to loosen the carriage belt.
VCE-MM-02
23