Installing/Mounting; Basic Safety Notes - Siemens SITRANS TDL Compact Operating Instructions

Installing/mounting

5.1

Basic safety notes

Pressure applications
Danger to personnel, system and environment will result from improper disassembly.
• Never attempt to loosen, remove, or disassemble process connection while vessel
Wetted parts unsuitable for the process media
Risk of injury or damage to device.
Hot, toxic and corrosive media could be released if the wetted parts are unsuitable for the
process medium.
• Ensure that the material of the device parts wetted by the process medium is suitable for
Note
Material compatibility
Siemens can provide you with support concerning selection of parts wetted by process
media. However, you are responsible for the selection of parts. Siemens accepts no liability
for faults or failures resulting from incompatible materials.
Unsuitable connecting parts
Risk of injury or poisoning.
In case of improper mounting, hot, toxic, and corrosive process media could be released at
the connections.
• Ensure that connecting parts (such as flange gaskets and bolts) are suitable for
14
DANGER
contents are under pressure.
WARNING
the medium. Refer to the information in Technical specifications (Page 52).
WARNING
connection and process media.
Compact Operating Instructions, 05\2023, A5E51659183-AA – revised 03/2024
5
SITRANS TDL