Inputs/Outputs Wizard; Navigating The Menu Structure; Chapter Overview; Navigation View - Siemens SITRANS F Operating Instructions Manual

6.6.2.7

Inputs/Outputs wizard

The first screen in the Inputs and outputs wizard informs about the active/passive operation
availability. It shows the application possibilities of your hardware. The kind of operation
depends on the wiring.
The Inputs and outputs wizard will guide you through setup of inputs and outputs on the
available channels.
Channel 2 - output
Channel 3 - relay
Channel 4 -input/output
6.6.3

Navigating the menu structure

6.6.3.1

Chapter overview

In this chapter it is described how to commission the device via the local display using the Quick
commissioning wizard.
6.6.3.2

Navigation view

The exact structure of the operating menu is explained in HMI menu structure (Page 115).
All items of the menu structure of the device are identified with a unique number.
Level 1 of the menu structure is standardized for all Siemens Process Instrumentation devices
and covers the following groups:
1. Quick start: Lists the most important parameters for quick configuration of the device. All
parameters in this view can be found elsewhere in the menu.
2. Setup: Contains all parameters which are needed to configure the device.
3. Maintenance and diagnostics: Contains parameters which affect the product behavior
regarding maintenance, diagnostics and service.
4. Communication: Contains parameters which describe the Modbus communication settings
of the device.
SITRANS FST020 IP65 (NEMA 4X)
Operating Instructions, 05/2022, A5E41425845-AC
Commissioning
6.6 Commissioning via local display
45