How To Enter Data; Selecting Items From An Option List - Siemens SITRANS FUG1010 IP65 NEMA 4X Instruction Manual

Section 3
When you press the <MENU> key, the cursor arrives at the first level of the Installation Menu. Refer to the
sample screens below. The left screen is from a dual-path model. Note that two columns, one on the left-
hand side and the other on right-hand side, divide the screen. The first left-hand item, [Meter Type], is
highlighted (white type on black). The next left-hand selection is [Meter Facilities]. Use the [Meter Facili-
ties] menu to set global meter options and controls.

3.4.2 HOW TO ENTER DATA

The left-hand column shows the menu cells (described previously). Another way to think about left-hand
column items is to consider them menu questions. Then you can see that the right-hand column an-
swers these questions. Right-hand column answers can be:
Another series of menu cells (may become left column items when selected).
z
An item from a scrollable option list.
z
A numeric entry.
z
An alphanumeric string (e.g., a site name).
z

Selecting Items from an Option List

This example shows how to use an option list to select the preferred flow units for your application. Do
not worry about how to access this menu right now. That will be explained later. Examine the screen
below. Note that the menu name [Flow/Total Units] appears in reverse-video text on lower left of the
screen. Note also that a reverse video bar highlights the menu cell [Flow Volume Units] and the right-
hand column shows the current default [Cubic Feet].
Top menu screen for dual-path system
Siemens Dual Path
Select Meter Type
Meter Type
Meter Facilities
Siemens Dual Path
Choose desired Flow rate volume units
Flow Volume Units
Std Flow Corr
Flow Time Units
Flow Display Range
Flow Display Scale
Total Volume Units
Totalizer Scale
Total Resolution
Totalizer Mode
Batch/Sample Total
Flow/Total Units
3-4
SITE 1
> Dual Path Flow
SITE 1
Cubic Feet
No
HR
Autorange
KCU FT/HR
Cubic Feet
KCU FT
00000x00
NETFLOW
0.000
1010GCNFM-3C