How To Set Up A Channel For Transit-Time Operation; How To Access The Channel Setup Menu And Create A Site - Siemens SITRANS FUH1010PVDX Operating Instructions Manual

Section 2
Press the <Right Arrow> and [Span Data] is highlighted.
Press the <Right Arrow> again and [Max Flow GAL/MIN] will appear. To change the [Max Flow GAL/
MIN] data, press the <Right Arrow> and an equal sign appears. Using the number keys, enter the
new data (e.g., 1846). Press the <ENT> key to store the numeric data.
Siemens Channel
Set 100% <20 mA> flow rate
Max Flow GAL/MIN
Min Flow GAL/MIN
Max Vs m/s
Min Vs m/s
Span Data
2.9

HOW TO SET UP A CHANNEL FOR TRANSIT-TIME OPERATION

This section shows how to set up a single-channel for a transit-time, clamp-on operation and how to
create a new site setup, enter pipe data and then select a liquid class (which tailors the meter response
to the liquid's density and viscosity). It explains how to select a clamp-on transducer model, pick a
mounting mode and, after physically mounting the transducers on the pipe, invoke the [Install Trans-
ducer] procedure. This setup is the fastest way to get the meter operational. It accepts most defaults and
only provides a data output on the local LCD display panel. The first step is to create a new site setup.
NOTE: Always begin a new installation by issuing the [Create/Name Site] command. This action
prepares the flow computer for site programming by loading system defaults into the
appropriate menu cells.

2.9.1 HOW TO ACCESS THE CHANNEL SETUP MENU AND CREATE A SITE

As shown is previously, when you access the Installation Menu, you will arrive at the top menu location
[Meter Type]. With single-channel meters, all you have to do is press the <Right Arrow> twice to access
the main section of the Clamp-On Menu (see next page).
Siemens Channel
Span 0% and 100% Values for Analog Data
Span Data
Set Alarm Levels
Calibrate Flow Rate
Data Span/Set/Cal
[1] SITE1
=0.00
0.00
0.00
0.00
2-30
[1] SITE1
Chan Not Setup
Siemens Channel
Set 100% <20 mA> flow rate
Max Flow GAL/MIN
Min Flow GAL/MIN
Max Vs m/s
Min Vs m/s
Span Data
CQO:1010PVXFM-3
[1] SITE1
1846
0.00
0.00
0.00