Setup Menu - Siemens US2:9810T24V User Manual

Display
Energy
Events
Power quality
Inputs/outputs
Nameplate
Custom
screens

Setup Menu

Setup menu
Meter configuration can be performed through the display.
Configure your meter's security settings to allow front panel (display) programming to set up the
meter using the display.
NOTE: Your display may appear differently than shown, depending on your meter's power
system, configuration, and display settings.
NOTE: Some setup parameters cannot be configured when revenue security is enabled.
169
Menu Submenu
Energy
Events
EN50160
Harmonics
Phasors
Digital inputs
Digital outputs
Analog inputs
Analog outputs
Nameplate
—
—
Content
Energy delivered-received, delivered and received.
Meter event log entries listing and details.
EN50160 values.
Voltage and current harmonics, with individual and total
harmonic values.
Phasor diagram with magnitude and angle values.
Digital and analog I/O values and counts.
• Owner and tag information, meter model, and serial
number.
• Meter feature set, firmware version, and firmware
CRC.
• RMD serial number and firmware version.
• Meter volts mode, meter nominals (voltage, current,
and frequency), and PT/CT ratio.
• Demand configuration values.
• Regulation tag.
Custom screens
Access to the setup menu screens.
9810 series - User manual
7EN05-0390-08