Setting The Page Count - Toshiba e-STUDIO170F Owner's Manual

Setting the Page Count

When this function is set to
1
ON, the designated number of
pages will be printed at the top
of the recording paper at the
remote station. This function is
Load the document face down
effective for a Direct Document
in the Document Support (see
Transmission only. (The total
page 82).
number of pages will be print-
ed automatically as part of the
Adjust the resolution and con-
TTI in Memory Transmissions.)
trast if desired (see pages 83
and 84).
This setting is very helpful for
confirming that all of the pages
loaded into the feeder have
been successfully sent.
It will also assist the recipient
to track the number of pages
as it will add a page count to a
the TTI at the top of your trans-
mitted pages (i.e., 1/5, 2/5, 3/5,
etc.).
The facsimile will compare the
number of pages actually sent
with the number you entered.
176
2
Load the Document
Press:
JAN-31 09:43 AM 100% PAGE NUMBER
AUTO RECEIVE (1-999)
3
Display the PAGE Enter the Number of
NUMBER Menu Document Pages
Enter the number of document
pages (1 to 999).
MENU
+
+
The press:
[ ]
JAN-31 09:43 AM 100%
ENTER TEL NUMBER
4
Enter the Facsimile
Number
Enter the number of the remote
facsimile using any of the fol-
lowing dialing methods or you
may designate another option
at this point.
• One Touch Key Dialing
... See page 89
• Alphabet Dialing
... See page 90
• Abbreviated Dialing
... See page 91
• Keypad Dialing
... See page 92