Fitting The Cpv Valve Terminal Onto The Simatic Et 200X - Festo CPV -VI Series Manual

2. Fitting

2.1.4 Fitting the CPV valve terminal onto the SIMATIC ET 200X

PLEASE NOTE
Instructions on the decentral periphery device ET
200X can be found in the SIEMENS AG manual.
A CPV valve terminal with:
• IC connection
• 8 valve plates
• fitted fastening CPV..-VI-BG-ET200X
• and relevant seals
can be fitted onto a pneumatic interface module of type
EM 148-P-DO 16 x P/CPV.. for the decentral periphery
device ET200X.
When the device is fitted, the switching status of the
valve solenoid coil can be recognized by the LED on
the pneumatic interface module.
Fitting
Proceed as follows:
1. The fastening is already fitted to the CPV valve ter-
CPV... 9811d
minal. Check that the flat seal is placed correctly
over the connecting lugs and the centring bolts be-
tween them (see Fig. 2/7).
2-13