Festo CPV -VI Series Manual page 88

Compact performance cpv valve terminal, pneumatics

Hide thumbs Also See for CPV -VI Series:

Table of Contents

5. Maintenance and conversion

4. Removing the components.

• Loosen both lower tie rods one turn.

• Then loosen the upper tie rod and pull it over the

• Unscrew the two lower tie rods until the heads of the

• Pull the valve terminal apart so that the distance be-

Fig. 5/1: Removing the valves

5-6

components which are to be replaced.

screws are flush with the outer surface of the end

plate (do not remove the tie rod).

tween the component to be replaced and the next

component is in each case 2 mm.

! !

Component to be replaced

Tie rod

Gap approx. 2 mm

CPV... 9811d

Table of Contents