Festo CPV -VI Series Manual page 21

1. System overview
Pneumatic The supply and work tubing can be connected centrally
multiple on CPV valve terminals with the pneumatic multiple
connector plate connector plate. The CPV valve terminals can be sep-
arated quickly from the supply and work tubing. By
means of appropriate end plates, conversion from indi-
vidual tubing to tubing with the pneumatic multiple con-
nector plate can be made at any time. The pneumatic
multiple connector plate is available in two variants:
– Standard design of pneumatic multiple connector
– Extended pneumatic multiple connector plate with ex-
CPV valve terminal with pneumatic
multiple connector plate (standard)
Fastening holes for fitting onto a wall on the standard design of pneumatic multiple
connector plate
Fastening holes for fitting onto a wall on the extended pneumatic multiple connector
plate
Fig. 1/2: Versions of the pneumatic multiple connector plate
CPV... 9811d
plate which fits flush with the end plates of the CPV
valve terminal. The holes for fastening to the wall or
for foot mounting are on the connection side of the
pneumatic multiple connector plate.
ternal fastening holes.
CPV valve terminal with extended
pneumatic multiple connector plate
1-7