General Connecting Principles - Festo CPV -VI Series Manual

3. Installation

3.1 General connecting principles

WARNING
Before undertaking installation or maintenance work,
switch off the following:
• the compressed air supply
• the power supply to the valve solenoid coils
You thereby avoid:
– uncontrolled movements of loose tubing
– unintentional and sudden movements of the con-
– undefined switching states of the electronic compo-
Please observe the following:
The components on the valve terminal contain electros-
tatically vulnerable components. Do not touch the con-
tact surfaces of the plug connnectors. These compo-
nents may be damaged if the regulations for handling
electrostatically vulnerable components are not ob-
served.
Laying the pneumatic tubing
PLEASE NOTE
• If necessary, place a seal under the screw
– If elbow connectors or multiple distributors are
CPV... 9811d
nected actuators
nents
connectors or silencers in order to avoid leakage.
used, the air flow will usually be reduced.
3-3